Pistol and Misc

SEPTEMBER’S DEAL: At the moment, I have 2 new Glock 19X’s for sale on GunBroker, (not consecutive serial numbers). Bidding is starting @ $620. That’s a good price, but I will do even better than that on the price if you purchase either or both of them from me here, as long as there are no bids in GunBroker of the pistols. I have them reserved for local sale, so no issues there. (No GunBroker Fees) Additionally, if you are local or can pick it up from me, I will transfer them for you free of charge. You can’t beat that with a stick! Gimme a call if you are interested!

OK! If you wanted a Cominolli Safety, you just missed one… I sold my personal Glock 34 with a Cominolli Safety, plus the original Glock Marksman Barrel, AND a ZEV Technologies Optimized match barrel. It was for sale on GunBroker, but sold here first.

Also this item, now sold, was listed on GunBroker, and is a hard to find OEM Glock 34 Gen 5 threaded barrel. Again, these are hard to find. This was the last one I had for sale.

Glock 19 Gen 4 with accessories

Bidding started on Gunbroker.com at $750.00 with no reserve

I sold my personal Glock 19 Gen 4. It has a Cominolli Safety installed on it. I inlayed a red dot in the frame (above the safety) to indicate when the safety is on or off. It looks cool, and is certainly one of a kind. I fired it once to determine if the stainless slide needed fitting to the gun. The few rounds I fired worked flawlessly, but due to the ammo shortage, I haven’t done any further range work with it, but it may or may not need fine tuning upon further range work. The Leupold DeltaPoint Pro on it in the picture is not included.

SPECIFICATIONS & FEATURES

  • AUCTION INCLUDES: Glock 19 Gen 4; Cominolli Manual Safety Kit; Spare MOS slide complete; Threaded Competition Barrel with thread protector; four OEM optic mounting plates; 3 magazines; 4 backstraps
  • CALIBER: 9mm
  • MAGAZINE CAPACITY: Comes with three 15rd magazines
  • SLIDES: Comes with the original factory slide, and a custom 17-4 Stainless Steel custom MOS slide with polished highlights, a ‘bead blast textured’ finish, and a tapered Gen 5 style nose. MOS slide has all OEM internals. I used the same recoil spring in either slide when I fired the pistol. Also included are all 4 Factory OEM Glock adapter plates for whatever optic you decide to use. NOTE: The Leupold DeltaPoint Pro, and the co-witness sights in the picture are NOT included
  • SAFETY: Cominolli Manual Safety Kit installed
  • BARRELS: Original Factory Barrel PLUS a ZEV threaded competition barrel
  • ADDITIONAL SPECS/NOTES: No sales to California or where prohibited by law.

Ruger Mark III Pistol

$300.00

This was my personal pistol, and has had less than 20 rounds fired through it.

With adjustable rear sights, this target model is for precision shooting. It features a loaded chamber indicator, comfortable grip, manual safety, and an internal cylindrical bolt. Also comes with a factory Picatinny Rail, top mounted.

SPECIFICATIONS & FEATURES

  • ACTION: Semi-Automatic
  • CALIBER: 22 LR
  • MAGAZINE CAPACITY: 10rd
  • FINISH: Blued
  • WEIGHT: 42 oz
  • BARREL LENGTH: Bull Barrel 5.5″
  • ADDITIONAL SPECS/NOTES: No sales to California or where prohibited by law.

AR-15 Pistol

MSRP $414.99

AM-15 Skeleton, 7.5″ 5.56 – Pistol is broke down for you to customize to your wants and needs! We left off the Pistol Grip, Buttstock, Forearm and barrel nuts so you can add the furniture you want!

The AM-15 Skeleton, 7.5″ 5.56 – Pistol comes chambered in .223/5.56 with a 16 ” M4 contour barrel with a 1-8 twist.

Comes with the following parts already assembled for you:

  • AM-15 Stripped Lower Receiver
  • Lower Parts Kit – No Fire Control Group & Pistol Grip
  • AM-15 Buffer Tube Kit – Carbine Length
  • AM-15 Stripped Upper Receiver
  • AM-15 Upper Parts Kit
  • AM-15 Bolt Carrier Group – .223
  • AM-15 Charging Handle
  • 5.56 7.5″ M4 Barrel – Pistol Length
  • Flash Hider, A2 Kit – 5.56 1/2-28
  • AM-15 Gas Block, Low Profile – .750
  • AM-15 Gas Tube – Carbine Length.


The AM-15 Stripped Pistol Lower Receiver is American made with superior quality for less! Our lower Receivers are CNC machined from a high-strength, 7075 T6 aluminum forging for reliable performance and outstanding durability. Machined to Military Specifications & Standards and marked “Multi-Cal ” to be used with multiple calibers on the AR-15 platform. This Lower Receiver comes in type III black hard anodize, and an Open Trigger. Don’t over pay for the same lower receiver with a different logo and use your money saved elsewhere on your build! Pair this with one of our Upper Receivers for a solid fit for your AM-15 build!


The Lower Parts Kit for AM-15 includes the following:

  • Bolt Catch (1), Bolt Catch Plunger (1), Bolt Catch Roll Pin (1), Bolt Catch Spring (1)
  • Buffer Retainer (1), Retainer Spring (1)
  • Magazine Catch (1), Magazine Catch Button (1), Magazine Catch Spring (1)
  • Pivot Pin (1), Pivot/Takedown Pin Detent (2), Pivot/Takedown Pin Detent Spring (2)
  • Safety Selector (1), Safety Selector Detent (1), Safety Selector Detent Spring (1)
  • Takedown Pin (1)
  • Trigger Guard (1), Trigger Guard Roll Pin (1)


The Mil Spec Buffer Tube Kit includes the following: 6 Position Buffer Tube, End Plate & Castle Nut, Carbine Length Buffer and Spring (Music Wire). This kit is compatible with the AR-15 Platform.

The AM-15 Stripped Upper Receiver is machined from 7075 T6 Aluminum forging. Featuring M4 feed ramps, this upper receiver is machined to Military Specifications & Standards and can be used with multiple calibers on the AR-15 platform. This upper receiver comes in type III hard coat black anodize. Match this Upper with one of our Lower Receivers for a solid fit for your AM-15 build.

The AM-15 Upper Receiver Parts Kit includes the following: Ejection Port Cover Assembly, and Forward Assist Assembly.

The M16 5.56/.223/ .300 AAC Complete Bolt and Carrier Group is Phosphate coated and Chrome Lined. The Carrier is made from 8620 steel, and the Bolt is made from 9310 steel and Phosphate coated, MPI Tested. The 223 Bolt and Bolt Carrier Assembly comes complete with Cam Pin, Firing Pin and Firing Pin Retainer.

The AM-15 Charging handle is the standard AR-15 charging handle. This charging handle is only for the AR-15 platform.

The 7.5″ 5.56 M4 barrel is the perfect barrel to start your next build and add to your AM-15 collection. This barrel is made from 4150 Chrome Moly Vanadium Steel with a Parkerized finish. Featuring a pistol length gas system with a .750″ gas port and a 1:7 twist, this barrel provides top accuracy and precision for your 5.56 build.

The AM-15 Low Profile Gas Block Assembly is intended to fit underneath free floats. This Gas Block is made from 12L14 Steel and is compatible with a .750 dia Barrel. Nitrite finish with laser engraved with the Anderson Manufacturing Logo on one side. Roll Pin and Set Screws are included with this gas block.

The Pistol Length Gas Tube is Made From 304 Stainless Steel and is 6.75″ long. Compatible With the AR-15 Platform

Click the picture above for further details.  Then call me for a price quote.

Wanted: If you have this North American Arms break top pistol for sale, please contact me.  This pistol is the North American Arms Ranger…

 Thanks!

I ship by common carrier, UPS and FedEx.  No international shipments.  No sales to California, or where prohibited by law.

Gift Certificates are available for your convenience:

CONTACT ME:  You may place an order, or ask any questions you may have here via email, or call 1-270-893-5808.  Contact me for trade-in quotes as well…

H30ur0122

error: Content is protected !!